How do you unclog a bathtub drain? To help unclog a bath drain first it helps to understand how bathtubs work and the parts involved. Bathroom and kitchen sinks are very similar. But, bathtubs are designed specifically to be attached/attached to waste disposals and dishwashers. However there are several things that can cause a blocked bathtub drain.
Clogging of these drains can occur when there is not enough pressure in the lines to force the water out. This causes bathroom sinks to become clogged. Other causes of clogs in bathtubs and sinks include soap, hair, hand lotion, and other scents and products.
The first step to unclogging any drain is to turn off the power to the household sewer line, or the main sewer line in your case. In some cases the kitchen sink drain can also be connected to the sewer lines; this will have to be carefully disconnected. After disconnecting the kitchen sink drain the next step to take is to unplug the plumbing fixture that connects to that drain. Most household plumbers do not recommend using the choke switch to unplug anything, but it can sometimes be necessary.
Next you want to use the water hose to carefully remove any debris that is stuck in the drain trap. You should be sure to pay special attention to the trap around the water outlet on the wall. It is usually located above the drain line and is difficult to reach. Remove any pieces of trash that are stuck inside. If you find any food bits or trash in the trap, it is time to complete the second step in how you unclog a sink drain.
The second step to unclogging a sink is to clean the sink itself. Use a drain cleaning solution or a wire mesh strainer to remove any hard debris such as bits of food or crumbs from cleaning your sink. After cleaning the sink you will want to take a look at your drainage system. You may need to completely change your drain lines and installation. In some cases simply adding an additional drain line will solve the problem of how do you unclog a sink drain.
The third step to unclogging a drain is to inspect the drain itself for any clogs. A clogged p-trap is obvious, as the water will not flow through the trap. This is usually easy to identify because it will cause the water to back up into the sink basin. If you can not easily see the clog, you can use a plunger to force the water to flow through the p-trap.
After identifying the clog, remove the object that is causing the clog. Many times using vinegar and water to unclog sink drains is a great solution. For larger drains, you can try using a snake. You should be careful when using these items because they are strong and might damage your pipes. Once you have the clog removed, you need to remove the object that is causing the clog. This object could be anything from hair to hair dryer cords to dried mud from the garden.
The last thing that you want to check before you start your project is the location of your water supply and the floor drain. You can loosen the adhesive that is holding the pipe in place with your fingernail, but if the plumber has put a plug in place to keep water from going to the drain, then you need to remove the plug. Once you have everything loosened up, you can remove the old drain. The best plumber’s snake that you can find will be one that is made of steel and is about twenty inches long. Using the liquid-plump clog destroyer, you will be able to unclog your sink with ease.
Unclogging drains can be a simple do it yourself but it can also be a lot easier to hire a professional to help. Sometimes it will save you money instead of wasting it on fixing your own projects. There are experienced plumbers to inspect and fix and unclog drains. Look online and see what resources are available to help. Sites such as https://www.fixitrightplumbing.com.au/plumber-adelaide/ have a ton of resources.
It all depends on the severity of the blocked drain, sometimes it is an easy fix, other times it is not. If you take some time and do your research you can get the help you need to get your sink unclogged.